Skip to Content
  1. All Products
  2. All Products
  3. Heat Shrink 2mm 1meter
Pricelist: - Pricelist

Heat Shrink 2mm 1meter

🔥 Heat Shrink Tubing – 2 mm, 3 mm, 4 mm (1 m Length)

High-quality polyolefin heat-shrink tubing in three common diameters—2 mm, 3 mm, and 4 mm—available in convenient 1 meter lengths. Ideal for insulating wires, splices, and protecting components in electronics, automotive, and DIY projects.

⚙️ Specifications

  • Material: Polyolefin (2:1 shrink ratio)

  • Available OD (unshrunk): 2 mm, 3 mm, 4 mm

  • Shrunk ID: ~1 mm, 1.5 mm, 2 mm respectively

  • Length: 1 meter per size

  • Wall Type: Flexible thin wall

  • Temperature Range: Typically −55 °C to +135 °C

  • Color: Black (standard); other colors may be available

⭐ Features & Benefits

  • 🛡️ Electrical Insulation: Adds abrasion and moisture protection

  • 🔩 Secure Fit: Shrinks tightly around wires and connectors

  • 🔥 Heat-Resistant: Ideal for use near engines or within electronics

  • 🎨 Modular Sizes: 2 mm for signal wires, 4 mm for power leads

  • ⚙️ Easy to Use: Shrinks quickly with a heat gun or lighter (be cautious)

📚 How to Use Heat Shrink Tubing

  1. Select the right size—tube ID should be just larger than the wire insulation

  2. Slide the tubing over the wire/joint before soldering

  3. After soldering, position the tubing over the exposed area

  4. Apply heat evenly (e.g., with heat gun around 150°C) until it shrinks snugly

🛠️ Typical Applications

  • Wire and cable harness insulation

  • Solder joint and connector protection

  • DIY model wiring, Arduino, Raspberry Pi setups

  • Automotive and LED installations

  • Repairs and waterproofing of electronic components

10.00 LE 10.00 LE

  • color

This combination does not exist.

wire Jumper Wire Heat Shrink