Switch on / off breadboard, Push Button 6 Pins
🔘 Switch On/Off – Push Button (6-Pin, Breadboard Friendly)
This 6-pin push button switch is a compact On/Off latch-type switch designed for easy use on breadboards or PCB projects. Unlike momentary push buttons, this switch toggles its state with each press — making it ideal for power control, mode selection, or manual switching in DIY electronics and Arduino-based systems.
⚙️ Technical Specifications
| Parameter | Specification |
|---|---|
| Type | Latching (Toggle On/Off) Push Button |
| Pins | 6 pins (3 pairs internally connected) |
| Mounting | Breadboard / Through-hole PCB |
| Contact Type | Push to toggle (On → Off → On...) |
| Pin Pitch | Standard 2.54mm spacing |
| Rated Voltage | Up to 50V DC |
| Current Rating | ~100mA to 500mA (depending on model) |
| Button Size | ~6×6mm top with ~9mm height |
✅ Features
🔘 Toggle switch — press once to turn ON, press again to turn OFF
⚙️ 6-pin layout — stable connection for breadboards or PCBs
🧩 Great for Arduino, ESP32, Raspberry Pi projects
💡 Used for manual control, power switch, or mode selection
🛠️ Easy to solder or insert into a breadboard
🛠️ Example Applications
🔋 Power switch for small circuits
🎛️ Mode selector or reset control
💡 LED On/Off toggle
🤖 Input switch in the robot control panel
📟 User interface button in DIY projects
📦 Common Accessories
✅ Female-to-male jumper wires
✅ Breadboard
✅ Resistor (for pull-up/down)
✅ LED or relay (for demo)